Quick Reference Guide

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114
6-2 Maintenance
This screen shows the following parameters:
Table 6-1. Menu 3.2 - FWAG114 Status Fields
Field Description
System Name This field displays the System Name assigned to the router.
Firmware Version This field displays the router firmware version.
WAN Port These parameters apply to the Internet (WAN) port of the router.
MAC Address This field displays the MAC address being used by the Internet (WAN)
port of the router.
IP Address This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, the router cannot connect to the
Internet.
IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
DHCP This field shows the protocol on the WAN port used to obtain the WAN
IP address. This field can show DHCP Client, Fixed IP, PPPoE, BPA or
PPTP. For example, if set to Client, the router is configured to obtain an
IP address dynamically from the ISP.
LAN Port These parameters apply to the Local (WAN) port of the router.
MAC Address This field displays the Media Access Control address being used by the
LAN port of the router.
IP Address This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.0.1
IP Subnet Mask This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
DHCP Identifies if the router’s built-in DHCP server is active for the LAN
attached devices.
IEEE802.11a/b/g Interface These parameters apply to the 802.11a Wireless port of the router.
SSID This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is Wireless.
MAC Address This field displays the MAC address being used by the wireless port of
the router.
Channel/Frequency Identifies if the channel the wireless port is using. See “Wireless
Channels” on page D-7 for the frequencies used on each channel.
WEP Status Identifies the current WEP configuration of this interface.