Quick Reference Guide

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114
2-6 Introduction
The FWAG114’s Front Panel
The front panel of the FWAG114 wireless firewall contains the status LEDs described below.
Figure 2-1: FWAG114 Front Panel
You can use some of the LEDs to verify connections. Viewed from left to right, Table 2-1
describes the LEDs on the front panel of the router. These LEDs are green when lit.
Table 2-1. LED Descriptions
Label Activity Description
POWER On Power is supplied to the firewall.
TEST On
Off
The system is initializing.
The system is ready and running.
INTERNET
100 (100 Mbps) On
Off
The Internet (WAN) port is operating at 100 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps) On
Off
The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Local port has detected a link with an attached device.
Data is being transmitted or received by the Local port.
WLAN On The Wireless (WLAN) port is operating.
ProSafe Dual-Band Wireless VPN Firewall
Broadband
MODEL
FWAG114
PWR TEST
100
LINK/ACT
1234
100
LINK/ACT
802.11a
802.11g