Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
2-10 Connecting the VPN Firewall to the Internet
v1.0, January 2010
5. Enter a Test Period in seconds. DNS query is sent periodically after every test period. The
default test period is 30 seconds.
6. Enter the Maximum Failover amount. The WAN interface is considered down after the
configured number of queries have failed to elicit a reply. The rollover link is brought up after
this. The Failover default is 4 failures.
The default time to roll over after the primary WAN interface fails is 2 minutes (a 30-second
minimum test period, times a minimum of 4 tests).
7. Click Apply to save your settings.
8. Click Reset to revert to the previous settings.
Once a rollover occurs, an alert will be generated (see “Activating Notification of Events and
Alerts” on page 6-23). When notified that the failed WAN interface has been restored, you can
force traffic back on the original primary WAN interface by reapplying the Auto-Rollover settings
in the WAN Port Mode menu.
Figure 2-3