Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
System Logs and Error Messages C-9
v1.0, January 2010
Traffic Metering Logs
Unicast Logs
ICMP Redirect Logs
Table C-13. System Logs: Traffic Metering
Message Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10
MB has reached for WAN1._
Explanation Traffic limit to WAN1 that was set as 10Mb has been reached.
This stops all the incoming and outgoing traffic if configured like that in “When
Limit is reached” on Traffic Meter web page.
Recommended Action To start the traffic, restart the Traffic Limit Counter.
Table C-14. System Logs: Unicast
Message Nov 24 11:52:55 [FVX538] [kernel] UCAST IN=SELF OUT=WAN
SRC=192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800
DPT=2049
Explanation • This packet (Unicast) is destined to the device from the WAN network.
• For other parameters, refer to Table C-1.
Recommended Action None
Table C-15. System Logs: Unicast, Redirect
Message Feb 2007 22 14:36:07 [FVX538] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
Explanation • This packet is ICMP Redirect message sent to the router bye another router.
• For other parameters, refer to Table C-1.
Recommended Action To enable these logs, from CLI command prompt of the router, enter this
command:
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1
And to disable it,
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0