Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
1-6 Introduction
v1.0, January 2010
VPN Firewall Front and Rear Panels
The FVX538 front panel shown below contains the port connections, status LEDs, and the factory
defaults reset button.
Table 1-1 describes each item on the front panel and its operation.
Figure 1-1
Table 1-1. Object Descriptions
Object LED Activity Description
1.
Power LED
On (Green) Power is supplied to the VPN firewall.
Off Power is not supplied to the VPN firewall.
2.
Test LED
On (Amber) Test mode: The system is initializing or the initialization
has failed.
Blinking (Amber) Writing to Flash memory (during upgrading or resetting to
defaults).
Off The system has booted successfully.
3,
WAN Ports and
LEDs
Two RJ-45 WAN ports N-way automatic speed negotiation, Auto MDI/MDIX.
Link/Act
LED
On (Green) The WAN port has detected a link with a connected
Ethernet device.
Blinking (Green) Data is being transmitted or received by the WAN port.
Off The WAN port has no link.
100 LED
On (Green) The WAN port is operating at 100 Mbps.
Off The WAN port is operating at 10 Mbps.
12 3 4 5 6 7