Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
About This Manual xv
v1.0, January 2010
202-10062-09 1.0 Mar. 09 Adds these corrections and topics for the March 2009 firmware
maintenance release:
• WIKID 2 factor authentication
• SIP ALG support
• DHCP Relay support
• Update VPN configuration procedure topics
• Update the Certificate management topic
• Correct the firewall scheduling topic
202-10062-10 1.0 January
2010
Added the following new features for the January 2010 firmware
maintenance release:
• Connection reset and delay options on the WAN ISP Settings
screen (see “Manually Configuring Your Internet Connection”).
• Support for DNS 3322 in the Dynamic DNS submenu (see
“Configuring Dynamic DNS (Optional)”).
• Support for an address range for inbound LAN rules on the Add
LAN WAN Inbound Service screen (see “Inbound Rules (Port
Forwarding)” and “Inbound Rules Examples”).
• Support for new log options such as Resolved DNS Names and
VPN on the Firewall Logs & E-mail screen (see “Activating
Notification of Events and Alerts”).
In addition, made the following substantial changes to the book:
• Resized all screen captures for better viewing.
• Added qualified Web browser information in the “Qualified Web
Browsers” and “Computer Network Configuration Requirements”
sections.
• Updated the WAN1 ISP Settings screen (Figure 2-1) and the ISP
Type options in the
”“Manually Configuring Your Internet
Connection” section.
• Updated the Dynamic DNS Configuration screen (Figure 2-6)
and the DDNS providers in the ““Configuring Dynamic DNS
(Optional)” section.
• Revised the “Enabling the Traffic Meter” section and moved this
section from the “Connecting the VPN Firewall to the Internet”
chapter to the “VPN Firewall and Network Management” chapter.
• Added the “Additional WAN Related Configuration“ section.
• Updated the LAN Setup screen (Figure 3-1), added LDAP
information and the Enable ARP Broadcast paragraph to the
“Configuring the LAN Setup Options” section, and revised this
section for more clarity.
• Updated the LAN Groups screen (Figure 3-2) and the Network
Database Group Name screen (Figure 3-3 ), and revised the
“Managing Groups and Hosts (LAN Groups)” section for more
clarity.