Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
Virtual Private Networking 5-27
v1.0, January 2010
Configuring XAUTH for VPN Clients
Once the XAUTH has been enabled, you must establish user accounts on the local database to be
authenticated against XAUTH, or you must enable a RADIUS-CHAP or RADIUS-PAP server.
To enable and configure XAUTH:
1. Select VPN from the main menu and Policies from the submenu. The IKE Policies screen will
display.
2. You can add XAUTH to an existing IKE policy by clicking Edit adjacent to the policy to be
modified or you can create a new IKE policy incorporating XAUTH by clicking Add.
(Figure 5-28 on page 5-28 shows the Add IKE Policy screen.)
Note: If you are modifying an existing IKE policy to add XAUTH, if it is in use by a
VPN policy, the VPN policy must be disabled before you can modify the IKE
policy.
Figure 5-27