Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
Firewall Protection and Content Filtering 4-37
v1.0, March 2009
6. Click Add. The Port Triggering Rule will be added to the Port Triggering Rules table.
To edit or modify a rule:
1. Click Edit in the Action column opposite the rule you wish to edit. The Edit Port Triggering
Rule screen will display.
2. Modify any of the fields for this rule.
3. Click Reset to cancel any changes and return to the previous settings.
4. Click Apply to save your modifications. Your changes will appear in the Port Triggering
Rules table.
To check the status of the Port Triggering rules, click the Status link on the Port Triggering
screen.
Bandwidth Limiting
Bandwidth Limiting determines the way in which data is communicated with your host. The
purpose of bandwidth limiting is to provide a method for limiting traffic, thus preventing LAN
users from consuming all the bandwidth on your WAN link.
• Bandwidth limiting is done on the available WAN interface in both the single port and Auto-
Failover modes. Bandwidth limiting is handled on the user-specified interface in Load
Balancing mode.
• Bandwidth limiting does not apply to the DMZ interface.
Figure 4-22