Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
4-4 Firewall Protection and Content Filtering
v1.0, March 2009
LAN users These settings determine which computers on your network are affected by this rule.
Select the desired options:
• Any – All PCs and devices on your LAN.
• Single address – Enter the required address and the rule will be applied to that
particular PC.
• Address range – If this option is selected, you must enter the start and finish fields.
• Groups – Select the Group to which this rule will apply. Use the LAN Groups screen
(under Network Configuration) to assign PCs to Groups. See “Managing Groups
and Hosts (LAN Groups)” on page 3-6.
WAN Users These settings determine which Internet locations are covered by the rule, based on
their IP address. Select the desired option:
• Any – All Internet IP address are covered by this rule.
• Single address – Enter the required address in the start field.
• Address range – If this option is selected, you must enter the start and end fields.
DMZ Users These settings determine which DMZ computers on the DMZ network are affected by
this rule. Select the desired options.
• Any – All PCs and devices on your DMZ network.
• Single address – Enter the required address and the rule will be applied to that
particular PC on the DMZ network.
• Address range – If this option is selected, you must enter the start and finish fields
of the DMZ computers.
Table 4-2. Outbound Rules (continued)
Item Description