Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
LAN Configuration 3-11
v1.0, March 2009
4. If desired, Enable the DHCP Server (Dynamic Host Configuration Protocol), which will
provide TCP/IP configuration for all computers connected to the router’s DMZ network.
Then configure the following items:
a. Starting IP Address – This box specifies the first of the contiguous addresses in the IP
address pool.
b. Ending IP Address – This box specifies the last of the contiguous addresses in the IP
address pool.
c. WINS Server – This box specifies the Windows Internet Naming Service Server IP.
d. Lease Time – This box specifies the Lease time to be given to the DHCP Clients.
e. Enable DNS Proxy – If enabled, the VPN firewall will as a DNS for address resolution.
5. Click Reset to cancel changes made on this screen and revert to the previous settings.
Figure 3-4
Note: If you enable the DNS Relay feature, you will not use the FVX538 as a DHCP
server but rather as a DHCP relay agent for a DHCP server somewhere else on
your network.