Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
6-12 Router and Network Management
v1.0, March 2009
To configure your firewall for Remote Management:
1. Select Administration from the main menu and Remote Management from the submenu.
The Remote Management screen will display.
2. Check Allow Remote Management radio box.
3. Specify what external addresses will be allowed to access the firewall’s remote management.
a. To allow access from any IP address on the Internet, select Everyone.
b. To allow access from a range of IP addresses on the Internet, select IP address range.
Enter a beginning and ending IP address to define the allowed range.
c. To allow access from a single IP address on the Internet, select Only this PC.
Enter the IP address that will be allowed access.
4. Specify the Port Number that will be used for accessing the management interface.
Figure 6-3
Note: For enhanced security, restrict access to as few external IP addresses as
practical.