Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
Virtual Private Networking 5-25
v1.0, March 2009
– RADIUS–CHAP or RADIUS–PAP (depending on the authentication mode accepted
by the RADIUS server) to add a RADIUS server. If RADIUS–PAP is selected, the
router will first check in the User Database to see if the user credentials are available.
If the user account is not present, the router will then connect to the RADIUS server
(see “RADIUS Client Configuration” on page 5-27).
• IPSec Host if you want to be authenticated by the remote gateway. In the adjacent
Username and Password fields, type in the information user name and password
associated with the IKE policy for authenticating this gateway (by the remote gateway).
5. Click Apply to save your settings.
User Database Configuration
The User Database screen is used to configure and administer users when Extended
Authentication is enabled as an Edge Device. Whether or not you use an external RADIUS server,
you may want some users to be authenticated locally. These users must be added to the User
Database Configured Users table.
To add a new user:
1. Select VPN from the main menu and VPN Client from the submenu. The User Database
screen will display.
2. Enter a User Name. This is the unique ID of a user which will be added to the User Name
database.
Figure 5-22