Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
Virtual Private Networking 5-7
v1.0, March 2009
Use the VPN Wizard Configure the Gateway for a Client Tunnel
1. From the main menu, go to VPN > IPSec VPN > VPN Wizard. The VPN Wizard displays.
2. Select VPN Client as your VPN tunnel connection.
3. Create a Connection Name like “Client to GW1”.
This descriptive name is not supplied to the remote VPN client; it is only for your reference.
4. Enter a Pre-shared Key; in this example, we are using r3m0+eC1ient, which must also be
entered in the VPN client software. The key length must be 8 characters minimum and cannot
exceed 49 characters.
5. The public Remote and Local Identifier are automatically filled in by pre-pending the first
several letters of the model number of your gateway to form FQDNs used in the VPN policies.
In this example, we are using GW1_remote.com, and GW1_local.com.
Figure 5-8
• VPN Client connection
• Connection name
• Pre-shared key:
r3m0+eC1ient
• Remote identifier
• Local identifier