Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
Virtual Private Networking 5-3
v1.0, January 2010
Follow these steps to set up a gateway VPN tunnel using the VPN Wizard.
1. Select VPN from the main menu and VPN Wizard from the submenu. The VPN Wizard
screen will display. To view the wizard default settings, click the VPN Wizard Default
Values link. You can modify these settings after completing the wizard.
2. Select Gateway as your connection type.
3. Create a Connection Name. Enter a descriptive name for the connection. This name used to
help you manage the VPN settings; is not supplied to the remote VPN endpoint.
4. Enter a Pre-shared Key. The key must be entered both here and on the remote VPN gateway,
or the remote VPN client. This key must be a minimum of 8 characters and should not exceed
49 characters.
Figure 5-3