Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
Firewall Protection and Content Filtering 4-9
v1.0, January 2010
To create a new outbound service rule:
1. In the LAN WAN Rules screen, click add under the Outbound Services table. The Add LAN
WAN Outbound Service screen will display.
2. Configure the settings as explained in Table 4-1 on page 4-3.
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Outbound Services table on the LAN WAN Rules screen.
Creating a LAN WAN Inbound Services Rule
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that allowing
inbound services opens holes in your firewall. Only enable those ports that are necessary for your
network.
To create a new inbound service rule in the LAN WAN Rules screen:
1. In the LAN WAN Rules screen, click add under the Inbound Services table. The Add LAN
WAN Inbound Service screen will display.
Figure 4-2