Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
Firewall Protection and Content Filtering 4-3
v1.0, January 2010
• Outbound Rules (service blocking). Outbound traffic is normally allowed unless the VPN
firewall is configured to disallow it.
• Customized Services. Additional services can be added to the list of services in the factory
default list. These added services can then have rules defined for them to either allow or block
that traffic (see “Adding Customized Services” on page 4-20).
• Quality of Service (QoS). Each service at its own native priority that impacts its quality of
performance and tolerance for jitter or delays. You can change this QoS priority if desired to
change the traffic mix through the system (see “Specifying Quality of Service (QoS)
Priorities” on page 4-22).
Outbound Rules (Service Blocking)
The VPN firewall allows you to block the use of certain Internet services by PCs on your network.
This is called service blocking or port filtering.
Note: See “Configuring Source MAC Filtering” on page 4-29 for yet another way to
block outbound traffic from selected PCs that would otherwise be allowed by the
VPN firewall.
Table 4-1. Outbound Rules
Item Description
Services Select the desired service or application to be covered by this rule. If the desired service
or application does not appear in the list, you must define it using the Services screen
(see “Adding Customized Services” on page 4-20).
Action Select the desired action for outgoing connections covered by this rule:
• BLOCK always
• BLOCK by schedule, otherwise Allow
• ALLOW always
• ALLOW by schedule, otherwise Block
Note: Any outbound traffic that is not blocked by rules you create will be allowed by the
default rule.
ALLOW rules are only useful if the traffic is already covered by a BLOCK rule. That is,
you wish to allow a subset of traffic that is currently blocked by another rule.
Select Schedule Select the desired time schedule (Schedule1, Schedule2, or Schedule3) that will be
used by this rule.
• This pull-down menu gets activated only when “BLOCK by schedule, otherwise Allow”
or “ALLOW by schedule, otherwise Block” is selected as Action.
• Use the Schedule screen to configure the time schedules (see “Setting a Schedule to
Block or Allow Specific Traffic” on page 4-25).