Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
LAN Configuration 3-15
v1.0, January 2010
• In Only. The VPN firewall accepts RIP information from other routers, but does not
broadcast its routing table.
• None. The VPN firewall neither broadcasts its route table nor does it accept any RIP
packets from other routers. This effectively disables RIP.
4. Select the RIP Version from the pull-down menu:
• Disabled. The default section disables RIP versions.
• RIP-1. A class-based routing that does not include subnet information. This is the most
commonly supported version.
• RIP-2. This includes all the functionality of RIPv1 plus it supports subnet information.
Though the data is sent in RIP-2 format for both RIP-2B and RIP-2M, the modes in which
packets are sent are different.
– RIP-2B. Sends the routing data in RIP-2 format and uses subnet broadcasting.
– RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
5. Authentication for RIP2B/2M required? If you selected RIP-2B or RIP-2M, check the Yes
radio box to enable authentication, and enter the MD-5 keys to authenticate between devices in
the First Key Parameters and Second Key Parameters sections on the screen.
6. Click Apply to save your settings.