Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
3-12 LAN Configuration
v1.0, January 2010
2. Click Add. The Add Static Route screen will display.
3. Enter a name for the static route in the Route Name field (for identification purpose only).
4. Determine whether the route is:
• Active or Inactive. A route can be added to the Static Routes table and made inactive, if
not needed. This allows routes to be used as needed without deleting the entry and re-
adding it. An inactive route is not broadcast if RIP is enabled. Select the Active radio box
to make this route effective.
• Private: Determine whether the route can be shared with other routers when RIP is
enabled. Select the Private radio box if you want to limit access to the LAN only. The
route will not be shared in a RIP broadcast or multicast.
5. Destination IP Address. Enter the IP address of the route’s final destination.
6. IP Subnet Mask. Enter the subnet mask of the route’s final destination. If the destination is a
single host, enter 255.255.255.255.
Figure 3-5
Figure 3-6