Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
Connecting the VPN Firewall to the Internet 2-15
v1.0, January 2010
A tab is provided for each supported DNS service provider.
The WAN Mode section on the screen displays the currently configured WAN Mode: Single
Port Broadband, Single Port Dial-up, or Auto Rollover with Primary Broadband.
If you have configured Single Port, select the tab for a DNS service provider, then fill out the
DDNS section for that port. If you have enabled Auto Rollover, select the tab for a DNS
service provider and complete both sections. (Only those options that match the configured
WAN Mode will be accessible.)
2. Select the Dynamic DNS Service radio box you want to enable. The fields corresponding to
the selection you have selected will be highlighted. Each DNS service provider requires its
own parameters.
3. Access the website of one of the DDNS service providers and set up an account. A link to each
DDNS provider is near the top right of the window opposite to the DDNS service provider
tabs. The link is encircled with a line in Figure 2-7.
Figure 2-7