Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
1-6 Introduction
v1.0, January 2010
Front Panel
The FVS338 front panel shown below contains the port connections, status LEDs, and the factory
defaults reset button.
The table below describes each item on the front panel and its operation.
Figure 1-1
Table 1-1. Object Descriptions
Object Activity Description
Power LED
On (Green) Power is supplied to the FVS338.
Off Power is not supplied to the FVS338.
Test LED
On (Amber) Test mode: The system is initializing or the initialization has failed.
Blinking (Amber) Writing to Flash memory (during upgrading or resetting to defaults).
Off The system has booted successfully.
MDM LED
On (Green) The serial port has successfully connected to an ISP and received an
IP Address.
Blinking (Green) Server data is being transmitted or received by the serial port.
Off The serial port has no link.
Internet
LEDs
Link/Act LED
On (Green) The WAN port has detected a link with a connected Ethernet device.
Blinking (Green) Data is being transmitted or received by the WAN port.
Off The WAN port has no link.
Local
LEDs
Internet
LEDs
Modem
LED
Power
LED
Test
LED