Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
System Logs and Error Messages B-9
v1.0, January 2010
ICMP Redirect Logs
Multicast/Broadcast Logs
FTP Logging
Table B-14. System Logs: Unicast, Redirect
Message Feb 2007 22 14:36:07 [FVS338] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
Explanation • This packet is ICMP Redirect message sent to the router bye another router.
• For other parameters, refer to Table B-1.
Recommended Action To enable these logs, from CLI command prompt of the router, enter this
command:
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1
And to disable it,
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0
Table B-15. System Logs: Multicast/Broadcast
Message Jan 1 07:24:13 [FVS338] [kernel] MCAST-BCAST IN=WAN OUT=SELF
SRC=192.168.1.73 DST=192.168.1.255 PROTO=UDP SPT=138 DPT=138
Explanation • This packet (Broadcast) is destined to the device from the WAN network.
• For other parameters, refer to Table B-1.
Recommended Action None
Table B-16. System Logs: FTP
Message Feb 2007 22 14:46:56 [FVS338] [kernel] [FTP-ACTIVE] SRC=192.168.10.211
DST=192.168.1.97 PROTO=TCP SPT=1983 DPT=21
Feb 2007 22 14:46:56 [FVS338] [kernel] [FTP-PASSIVE] SRC=192.168.10.211
DST=192.168.1.97 PROTO=TCP SPT=1984 DPT=21
Feb 2007 22 19:48:17 [FVS338] [kernel] [FTP-DATA][ACCEPT]
SRC=192.168.10.10 DST=192.168.20.10 PROTO=TCP SPT=54879
DPT=6459
Explanation • These packets are active and passive FTP session data transfers
respectively.
• For other parameters, refer to Table B-1.
Recommended Action To enable these logs, from CLI command prompt of the router, enter this
command:
monitor/firewallLogs/logger/loggerConfig logFtp 1
And to disable it,
monitor/firewallLogs/logger/loggerConfig logFtp 0