Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual

System Logs and Error Messages B-3

v1.0, January 2010

This section describes logs generated by the administrative interfaces of the device.

VPN Firewall Restart

This logging is always done.

Explanation Message1: DNS resolution for the NTP server (time-f.netgear.com)

Message2: request for NTP update from the time server.

Message3: Adjust time by re-setting system time.

Message4: Display date and time before synchronization, that is when

resynchronization started

Message5: Display the new updated date and time.

Message6: Next synchronization will be after the specified time mentioned.

Example: In the above logs the next synchronization will be after two hours.

The synchronization time interval is configurable via the CLI

Recommended Action None

Table B-5. System Logs: Login/Logout

Message Nov 28 14:45:42 [FVS338] [login] Login succeeded: user admin from

192.168.10.10

Explanation Login of user admin from host with IP address 192.168.10.10

Recommended Action None

Message Nov 28 14:55:09 [FVS338] [seclogin] Logout succeeded for user admin

Nov 28 14:55:13 [FVS338] [seclogin] Login succeeded: user admin from

192.168.1.214

Explanation Secure login/logout of user admin from host with IP address 192.168.1.214.

Recommended Action None

Table B-6. System Logs: Firewall Restart

Message Jan 23 16:20:44 [FVS338] [wand] [FW] Firewall Restarted

Explanation Log generated when the firewall is restarted.

This log is logged when firewall restarts after applying any changes in the

configuration.

Recommended Action None

Table B-4. System Logs: NTP (continued)