Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
6-32 VPN Firewall and Network Management
v1.0, January 2010
Monitoring VPN Firewall Statistics
To display the VPN firewall statistics:
1. Select Monitoring from the main menu and Router Status from the submenu. The Router
Status screen will display (see Figure 6-14 on page 6-31).
2. Click the Show Statistics link in the upper right-hand section of the screen. The Router
Statistics screen will display.
For each interface, the number of transmitted and received packets, the number of collided
packets, the transmitted and received Bytes per second, and the interface up-time are shown.
Broadband
Configuration
• WAN Mode: Single, or Rollover.
• WAN State: UP or DOWN.
• NAT: Enabled or Disabled.
• Connection Type: Static IP, DHCP, PPPoE, or PPTP.
• Connection State: Connected or Disconnected.
• WAN IP Address: The IP address of the WAN interface.
• Subnet Mask: The IP subnet mask of the WAN interface.
• Gateway: The gateway IP address for the WAN interface.
• Primary DNS: The IP address of the primary DNS server for the WAN interface.
• Secondary DNS: The IP address of the secondary DNS server for the WAN
interface.
• MAC Address: The MAC address of the WAN interface.
Dialup Configuration Displays the same details as for the broadband configuration with the exception that
the Connection Type is always Dialup.
Figure 6-15
Table 6-3. Router Configuration Status Fields (continued)
Item Description