Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
6-30 VPN Firewall and Network Management
v1.0, January 2010
To configure the traffic meter for the dial-up port, select the Dial-upTraffic Meter tab and repeat
this process.
The Internet Traffic Statistics section of the screen displays statistics on Internet traffic through
the WAN port. If you have not enabled the traffic meter, these statistics are not available.
To display a report of Internet traffic by type, click the Traffic by Protocol link in the upper right-
hand section of the Traffic Meter screen . The volume of traffic for each protocol will be displayed
in a popup window. Traffic counters are updated in MBytes scale; the counter starts only when
traffic passed is at least 1MB.
Viewing the Router Configuration and System Status
The Router Status screen provides status and usage information. Select Monitoring from the main
menu and Router Status from the submenu. The Router Status screen will display (see Figure 6-
14 on page 6-31). The Router Status screen displays current settings and statistics for your VPN
firewall. Because this information is read-only, any changes must be made on other screens.
Figure 6-13