Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
VPN Firewall and Network Management 6-9
v1.0, January 2010
2. In the Enable Local Authentication section of the screen:
a. Enable local authentication by selecting the Yes radio box.
b. Click Apply to save your settings.
3. In the User Selection section of the screen, select either the Edit Admin Settings or Edit
Guest Settings radio box.
4. In either the Admin Settings or the Guest Settings section of the screen:
a. change the password by first entering the old password, and then entering the new
password twice.
b. Click Apply to save your settings.
5. In the Local Authentication Settings section of the screen:
a. Change the Idle Logout Time field to the number of minutes you require. The default is 5
minutes.
b. Click Apply to save your settings.
Adding External Users
You can add external users for which you then can configure an authentication method (see
“Configuring an External Server for Authentication” on page 6-10).
To add an external users:
1. Select Users from the main menu and External Authentication from the submenu. The
External Users screen will display.
Note: The password and time-out value you enter will be changed back to password
and 5 minutes, respectively, after a factory defaults reset.
Figure 6-2