Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
5-36 Virtual Private Networking
v1.0, January 2010
2. Click add to configure a new IKE policy. The Add IKE Policy screen will display.
3. In the Mode Config Record section, enable Mode Config by checking the Ye s radio box and
selecting the Mode Config record you just created from the pull-down menu. (You can view
the parameters of the selected record by clicking the view selected radio box.)
Mode Config works only in Aggressive Mode, and Aggressive Mode requires that both ends
of the tunnel be defined by a FQDN.
Figure 5-34