Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
5-34 Virtual Private Networking
v1.0, January 2010
2. Click add. The Add Mode Config Record screen will display.
3. Enter a descriptive Record Name such as “Remote Users”.
4. Assign at least one range of IP Pool addresses in the First IP Pool field to give to remote VPN
clients.
5. If you have a WINS server on your local network, enter its IP address.
6. Enter one or two DNS server IP addresses to be used by remote VPN clients.
7. If you enable Perfect Forward Secrecy (PFS), select DH Group 1 or 2. This setting must match
exactly the configuration of the remote VPN client,
8. Specify the local IP subnet to which the remote client will have access. Typically, this is your
VPN firewall’s LAN subnet, such as 192.168.2.1/255.255.255.0. (If not specified, it will
default to the LAN subnet of the VPN firewall.)
Figure 5-32
Note: The IP Pool should not be within your local network IP addresses. Use a
different range of private IP addresses such as 172.20.xx.xx.