Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
Virtual Private Networking 5-33
v1.0, January 2010
Configuring Mode Config Operation on the VPN Firewall
You need to configure two screens: the ModeConfig screen and the IKE Policies screen.
To configure the ModeConfig screen:
1. Select VPN from the main menu and Mode Config from the submenu. The Mode Config
screen will display.
Note: After configuring a Mode Config record, you must manually configure an IKE
policy and select the newly-created Mode Config record from the Select Mode
Config Record pull-down menu (see “Configuring Mode Config Operation on the
VPN Firewall.” You do not need to make changes to any VPN policy.
Note: An IP address that is allocated to a VPN client is released only after the VPN client
has gracefully disconnected or after the SA liftetime for the connection has timed
out.
Figure 5-31