Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
Virtual Private Networking 5-15
v1.0, January 2010
• State. The current state of the SA. Phase 1 is “Authentication phase” and Phase 2 is “Key
Exchange phase”.
• Action. Allows you to terminate or build the SA (connection), if required.
To view VPN firewall VPN logs, select Monitoring from the main menu and VPN Logs from the
submenu. The VPN Logs screen will display.
Managing VPN Policies
When you use the VPN Wizard to set up a VPN tunnel, both a VPN policy and an IKE policy are
established and populated in both policy tables. The name you selected as the VPN Tunnel
connection name during Wizard setup identifies both the VPN policy and IKE policy. You can edit
existing policies, or add new VPN and IKE policies directly in the policy tables.
Figure 5-18
Note: You cannot modify an IKE policy that is associated with an enabled VPN policy.
To modify the IKE policy, first disable the VPN policy. After you have modified
and saved the IKE policy, you can then re-enable the VPN policy.