Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
5-14 Virtual Private Networking
v1.0, January 2010
The VPN client system tray icon provides a variety of status indications, which are listed below.
VPN Firewall VPN Connection Status and Logs
To view VPN firewall VPN connection status, select VPN from the main menu and Connection
Status from the submenu. The VPN Connection Status screen will display.
You can set a poll interval (in seconds) to check the connection status of all active IKE policies to
obtain the latest VPN tunnel activity. The Active IPSec SA(s) table also lists current data for each
active IPsec SA (security association):
• Policy Name. The name of the VPN policy associated with this SA.
• Endpoint. The IP address on the remote VPN endpoint.
• Tx (KBytes). The amount of data transmitted over this SA.
• Tx (Packets). The number of packets transmitted over this SA.
Table 5-2.
System Tray Icon Status
The client policy is deactivated.
The client policy is deactivated but not connected.
The client policy is activated and connected.
A flashing vertical bar indicates traffic on the tunnel.
Figure 5-17