Quick Reference Guide

ProSafe VPN Firewall 50 FVS338 Reference Manual
5-10 Virtual Private Networking
v1.0, January 2010
3. In the left frame, click My Identity. Fill in the options according to the instructions below.
•From the Select Certificate pull-down menu, choose None.
• Click Pre-Shared Key to enter the key you provided in the VPN Wizard; in this example,
we are using “r3m0+eClient.”
• From the ID Type pull-down menu, choose Domain Name.
• Leave Virtual Adapter disabled.
•In Network Adapter select the adapter you will use; the IP address of the selected adapter
will display.
4. Verify the Security Policy settings; no changes are needed (see Figure 5-12 on page 5-11).
• On the left, click Security Policy to view the settings: no changes are needed.
• On the left, expand Authentication (Phase 1) and click Proposal 1: no changes are
needed.
• On the left, expand Key Exchange (Phase 2) and click Proposal 1. No changes are
needed.
5. In the upper left of the window, click the disk icon to save the policy.
Figure 5-11