Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
4-10 Firewall Protection and Content Filtering
v1.0, January 2010
2. Configure the parameters based on the descriptions in Table 4-1 on page 4-3.
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Outbound Services table.
Creating a LAN WAN Inbound Services Rule
This Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that allowing
inbound services opens holes in your VPN firewall. Only enable those ports that are necessary for
your network.
To create a new inbound service rule in the LAN WAN Rules screen:
1. Click Add under the Inbound Services table. The Add LAN WAN Inbound Service screen is
displayed.
2. Configure the parameters based on the descriptions in Table 4-2 on page 4-6.
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed in the Inbound Services table.
Figure 4-3