Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Firewall Protection and Content Filtering 4-9
v1.0, January 2010
To change the default outbound policy, follow these steps:
1. Go to the LAN WAN Rules screen, shown in Figure 4-1 on page 4-8.
2. Change the Default Outbound Policy by selecting Block Always from the pull-down menu.
3. Click Apply.
Creating a LAN WAN Outbound Services Rule
An outbound rule will block or allow the selected application from an internal IP LAN address to
an external WAN IP address according to the schedule created on the Schedule screen. You can
also tailor these rules to your specific needs (see “Administrator Tips” on page 4-33).
To create a new outbound service rule in the LAN WAN Rules screen:
1. Click Add under the Outbound Services table. The Add LAN WAN Outbound Service screen
is displayed.
Note: This feature is for advanced administrators only! Incorrect configuration will cause
serious problems.
Figure 4-2