Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
LAN Configuration 3-3
v1.0, January 2010
1. Go to Network Configuration > LAN Setup to display the LAN Setup screen.
2. In the LAN TCP/IP Setup section, configure the following settings:
• IP Address. The LAN address of your VPN firewall (factory default: 192.168.1.1).
Note: If you enable the DNS Relay feature, you will not use the VPN firewall as a DHCP
server but rather as a DHCP relay agent for a DHCP server somewhere else on
your network.
Figure 3-1