Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
2-10 Connecting the FVS336G to the Internet
v1.0, January 2010
7. Review the Internet (IP) Address options.
8. If your ISP has not assigned a static IP address, click Get dynamically from ISP. The ISP will
automatically assign an IP address to the VPN firewall using DHCP network protocol. The IP
address and subnet mask fields will be inactivated. As an option, you can select the following
checkboxes:
• Client Identifier. Select this checkbox if your ISP requires the Client Identifier
information to assign an IP address using DHCP.
• Vendor Class Identifier. Select this checkbox if your ISP requires the Vendor Class
Identifier information to assign an IP address using DHCP.
The ISP will automatically assign an IP address to the VPN firewall using DHCP network
protocol.
9. If your ISP has assigned a fixed (static) IP address, select Use Static IP Address, and
configure the following fields:
• IP Address. Enter the Static IP address assigned to you, that identifies the VPN firewall to
your ISP.
• Subnet Mask. Enter the mask provided by the ISP or your network administrator.
• Gateway IP Address. Enter the IP address of the ISP’s gateway, provided by the ISP or
your network administrator.
Figure 2-8