Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Introduction 1-7
v1.0, January 2010
Rear Panel Features
The rear panel of the FVS336G includes Gigabit Ethernet LAN and WAN connections, a cable
lock receptacle, power and reset switches, and an AC power connection.
Viewed from left to right, the rear panel contains the following elements:
• Factory Defaults button: Using a sharp object, press and hold this button for about ten seconds
until the front panel TEST light flashes to reset the FVS336G to factory default settings. All
configuration settings will be lost and the default password will be restored.
• LAN Ethernet ports: Four switched N-way automatic speed negotiating, Auto MDI/MDIX,
Gigabit Ethernet ports with RJ-45 connectors.
• WAN Ethernet ports: Two independent N-way automatic speed negotiating, Auto MDI/MDIX,
Gigabit Ethernet ports with RJ-45 connectors.
• Cable security lock receptacle.
LINK/ACT
(Link and
Activity)
On (Green) The WAN port has detected a link with a connected Ethernet device.
Blinking (Green) Data is being transmitted or received by the WAN port.
Off The WAN port has no link.
LAN Ports
SPEED
On (Green) The LAN port is operating at 1,000 Mbps.
On (Amber) The LAN port is operating at 100 Mbps.
Off The LAN port is operating at 10 Mbps.
LINK/ACT
(Link and
Activity)
On (Green) The LAN port has detected a link with a connected Ethernet device.
Blinking (Green) Data is being transmitted or received by the LAN port.
Off The LAN port has no link.
Figure 1-2
Table 1-1. LED Descriptions (continued)
Object Activity Description