Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
1-6 Introduction
v1.0, January 2010
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the FVS336G for
repair.
Front Panel Features
The FVS336G front panel shown below includes four groups of status indicator light-emitting
diodes (LEDs), including Power and Test, WAN1, WAN2, and the LAN lights:
The function of each LED is described in the following table:
Figure 1-1
Table 1-1. LED Descriptions
Object Activity Description
PWR
(Power)
On (Green) Power is supplied to the FVS336G.
Off Power is not supplied to the FVS336G.
TEST
On (Amber) Test mode: The system is initializing or the initialization has failed.
Blinking (Amber) Writing to Flash memory (during upgrading or resetting to defaults).
Off The system has booted successfully.
WAN Ports
ACTIVE
On (Green) The WAN port has a valid Internet connection.
On (Amber) The Internet connection is down or not being used because the WAN port
is in standby for failover.
Off The WAN port is either not enabled or has no link.
SPEED
On (Green) The WAN port is operating at 1,000 Mbps.
On (Amber) The WAN port is operating at 100 Mbps.
Off The WAN port is operating at 10 Mbps.