Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
9-10 Monitoring System Performance
v1.0, January 2010
To set the poll interval:
1. Click the Stop button.
2. From the Poll Interval pull-down menu, select a new interval (the minimum is 5 seconds, the
maximum is 5 minutes).
3. Click the Set Interval button.
Monitoring the Status of WAN Ports
You can monitor the status of both of the WAN connections, the Dynamic DNS Server
connections, and the DHCP Server connections. To monitor the status of the WAN ports:
1. Select Network Configuration > WAN Settings from the menu. The WAN1 ISP Settings
screen is displayed.
2. Click the WAN Status link in the upper right-hand section of the screen. The Connection
Status popup window displays a status report on the WAN1 port.
3. To get a status report on the WAN2 port, click the WAN2 ISP Settings tab, and then click the
WAN Status link.
Figure 9-6