Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
VPN Firewall and Network Management 8-15
v1.0, January 2010
Once you have installed the VPN firewall and have it working properly, you should back up a copy
of your settings to a file on your computer. If necessary, you can later restore the VPN firewall
settings from this file. The Settings Backup and Firmware Upgrade screen allows you to:
• Back up and save a copy of your current settings
• Restore saved settings from the backed-up file.
• Revert to the factory default settings.
• Upgrade the VPN firewall firmware from a saved file on your hard disk to use a different
firmware version.
Backing Up Settings
To back up settings:
1. Select Administration > Settings Backup and Firmware Upgrade from the menu. The
Settings Backup and Firmware Upgrade screen is displayed.
2. Click Backup to save a copy of your current settings.
• If your browser is not set up to save downloaded files automatically, locate where you
want to save the file, specify file name, and click Save.
Figure 8-6