Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
8-10 VPN Firewall and Network Management
v1.0, January 2010
Enabling Remote Management Access
Using the Remote Management screen, you can allow an administrator on the Internet to
configure, upgrade, and check the status of your VPN firewall. You must be logged in locally to
enable remote management (see “Logging into the VPN Firewall” on page 2-2).
To configure your VPN firewall for remote management:
1. Select Administration > Remote Management from the menu. The Remote Management
screen is displayed.
Note: Be sure to change the default configuration password of the VPN firewall to a very
secure password. The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both upper and lower case), numbers,
and symbols. Your password can be up to 30 characters. See “Changing Passwords
and Administrator Settings” on page 8-8 for the procedure on how to do this.
Figure 8-3