Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
xvii
v1.0, January 2010
202-10257-04 1.3 March
2009
Added these corrections and topics for the March 2009 firmware
maintenance release:
• WIKID 2 factor authentication
• SIP AGL support
• DHCP Relay support
• Updated VPN configuration procedure topics
• Updated the Certificate management topic
• Corrected the firewall scheduling topic
202-10257-05 1.0 January
2010
Added the following new features for the January 2010 firmware
maintenance release:
• Connection reset and delay options on the WAN ISP Settings
screen (see “Manually Configuring the Internet Connection”).
• Support for DNS 3322 in the Dynamic DNS submenu (see
“Configuring Dynamic DNS (Optional)”).
• Support for an address range for inbound LAN rules on the Add
LAN WAN Inbound Service screen (see “Inbound Rules (Port
Forwarding)” and “Creating a LAN WAN Inbound Services Rule”).
• Support for new log options such as Resolved DNS Names and
VPN on the Firewall Logs & E-mail screen (see “Activating
Notification of Events and Alerts”).
In addition, made the following substantial changes to the book:
• Resized many screen captures for better viewing.
• Made various corrections.
• Made global stylistic changes for consistency and clarity.
• Added technical support information to page ii.
• Updated the bottom label image (Figure 1-3).
• Updated the qualified Web browsers in the “Qualified Web
Browsers” and “Computer Network Configuration Requirements”
sections.
• Updated the WAN1 ISP Settings screen (Figure 2-3) and the ISP
Type options in the
“Manually Configuring the Internet
Connection” section.
• Updated the Dynamic DNS Configuration screen (Figure 2-12)
and the DDNS providers in the “Configuring Dynamic DNS
(Optional)” section.
• Reorganized Chapter 4, “Firewall Protection and Content
Filtering.”
• Updated the LAN Setup screen (Figure 3-1). Added DHCP Relay
information, LDAP information, and the Enable ARP Broadcast
paragraph to the “Configuring the LAN Setup Options” section.
• Updated the Add LAN WAN Inbound Service screen (Figure 4-3),
related screens in the “Inbound Rules Examples” section, and the
Inbound Rules table (Table 4-2) to show that a range of IP
addresses can be selected for the Send to LAN Server field.
• Updated the “Modifying Rules” section.