Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
7-10 Managing Users, Authentication, and Certificates
v1.0, January 2010
To modify user settings, including administrative user settings:
1. Select Users > Users from the menu. The Users screen is displayed (see Figure 7-4 on page
7-6).
2. In the Action column of the List of Users table, click Edit for the user for which you want to
modify the settings. The Edit User screen is displayed.
3. Configure the following fields:
a. Select User Type. From the pull-down menu, select one of the pre-defined user types that
determines the access credentials:
• Administrator. User who has full access and the capacity to change the VPN
firewall’s configuration (that is, read/write access).
• SSL VPN User. User who can only log in to the SSL VPN portal.
• IPSEC VPN User. User who can only make an IPsec VPN connection via a
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled (see
“Configuring Extended Authentication (XAUTH)” on page 5-19”).
• Guest User. User who can only view the VPN firewall’s configuration (that is,
read-only access).
b. Check to Edit Password. Select this checkbox to make the password fields accessible to
modify the password. Change the password by first entering the old password, and then
entering the new password twice.
c. Idle Timeout. Change the idle logout time to the number of minutes you require. The
default is 5 minutes.
Figure 7-9