Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Managing Users, Authentication, and Certificates 7-7
v1.0, January 2010
c. Select Group. Select from a list of configured groups. The user will be associated with the
domain that is associated with that group.
d. Password/Confirm Password. The password can contain alphanumeric characters, dash,
and underscore.
e. Idle Timeout. For an Administrator, this is the period at which an idle user will be
automatically logged out of the Web Configuration Manager.
4. Click Apply to save and apply your entries. The new user appears in the List of Users table.
Setting User Login Policies
You can restrict the ability of defined users to log into the Web Configuration Manager. You can
also require or prohibit logging in from certain IP addresses or using particular browsers.
To configure user login policies:
1. In the Action column in the List of Users table, click Policies adjacent to the user policy you
want to configure. The Login Policies screen is displayed.
2. To prohibit this user from logging in to the VPN firewall, select the Disable Login checkbox.
3. To prohibit this user from logging in from the WAN interface, select the Deny Login from
WAN Interface checkbox. In this case, the user can log in only from the LAN interface.
4. Click Apply to save your settings.
Figure 7-6
Note: For security reasons, Deny Login from WAN Interface is checked by default
for admin and guest.