Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Managing Users, Authentication, and Certificates 7-5
v1.0, January 2010
Creating a Group
The use of groups simplifies the configuration of VPN policies when different sets of users will
have different restrictions and access controls.
To create a group:
1. Select Users > Groups from the menu. The Groups screen is displayed.
2. Configure the new group settings in the Add New Group section of the screen:
a. Name. Enter a descriptive name for the group.
b. Domain. Select the appropriate domain (only for Administrator or SSL VPN User).
c. Timeout. For an Administrator, this is the period at which an idle user will be
automatically logged out of the Web Configuration Manager
3. Click Add.
The new group appears in the List of Groups table, ready for use in user account setup.
Note: Groups that are defined in the User screen are used for setting SSL VPN policies.
These groups should not be confused with LAN Groups that are defined in the
Network Configuration | LAN Settings | LAN Groups tab, which are used to
simplify firewall policies.
Figure 7-3