Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
7-4 Managing Users, Authentication, and Certificates
v1.0, January 2010
3. Configure the following fields:
a. Enter a descriptive name for the domain in the Domain Name field.
b. Select the Authentication Type.
The required fields are activated in varying combinations according to your selection of
Authentication Type:
c. From the Select Portal pull-down menu, select a portal with which this domain will be
associated.
4. Click Apply to save and apply your entries. The Domain screen displays a new domain row.
5. If you use local authentication, make sure that it is not disabled: select the Yes radio button in
the Local Authentication section of the Domain screen (see Figure 7-1 on page 7-3).
6. If you change local authentication, click Apply in the Domain screen to save your settings.
Table 7-2.
Authentication Type Required Authentication Information Fields
Local User Database None
Radius-PAP Authentication Server, Authentication Secret
Radius-CHAP Authentication Server, Authentication Secret
Radius-MSCHAP Authentication Server, Authentication Secret
Radius-MSCHAPv2 Authentication Server, Authentication Secret
WIKID-PAP Authentication Server, Authentication Secret
WIKID-CHAP Authentication Server, Authentication Secret
MIAS-PAP Authentication Server, Authentication Secret
MIAS-CHAP Authentication Server, Authentication Secret
NT Domain Authentication Server, Workgroup
Active Directory Authentication Server, Active Directory Domain
LDAP Authentication Server, LDAP Base DN
Warning: If you disable local authentication, make sure that there is at least one
external administrative user otherwise access to the VPN firewall is
blocked.