Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
6-18 Virtual Private Networking Using SSL
v1.0, January 2010
4. In the Add SSL VPN Policies section of the screen, review the Apply Policy To options and
click one.
Depending upon your selection, specific options to the right are activated or inactivated as
noted in the following:
• If you choose Network Resource, you will need to enter a descriptive Policy Name, then
choose a Defined Resource and relevant Permission (PERMIT or DENY) from the pull-
down menus.
If a needed network resource has not been defined, you can add it before proceeding with
this new policy. See “Adding New Network Resources ” on page 6-13.
• If you choose IP Address, you will need to enter a descriptive Policy Name, the specific
IP Address, then choose the Service and relevant Permission from the pull-down menus.
Figure 6-10
Figure 6-11