Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Virtual Private Networking Using SSL 6-17
v1.0, January 2010
Adding an SSL VPN Policy
To add a policy, follow these steps:
1. Select VPN > SSL VPN from the menu, and select the Policies tab. The Policies screen is
displayed.
2. Make your selection from the following Query options:
• Click Global if this new policy is to exclude all users and groups.
• Click Group if this new policy is to be limited to a selected group.
Open the pull-down menu and choose the relevant group’s name.
• Click User if this new policy is to be limited to a selected user.
Open the pull-down menu and choose the individual user’s name.
3. Click Add. The Add Policies screen appears (see Figure 6-10 on page 6-18 through Figure 6-
13 on page 6-19).
Note: Global policies are displayed in the List of SSL VPN Policies table. Policies
that apply only to groups or users are displayed in the Related Policies Table
but not in the List of SSL VPN Policies table.
Figure 6-9
Note: You should have already created the needed groups or users as described in
“Adding Authentication Domains, Groups, and Users” on page 7-1.