Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Virtual Private Networking Using IPsec 5-27
v1.0, January 2010
10. Specify the VPN policy settings. These settings must match the configuration of the remote
VPN client. Recommended settings are:
• SA Lifetime: 3600 seconds
• Authentication Algorithm: SHA-1
• Encryption Algorithm: 3DES
11. Click Apply.
The new record should appear in the List of Mode Config Records table on the Mode Config
screen.
Configuring an IKE Policy for Mode Config Operation
Next, you must configure an IKE policy:
1. Select VPN > IPsec VPN from the menu. The IKE Policies screen is displayed showing the
current policies in the List of IKE Policies table.
2. Click Add to configure a new IKE Policy. The Add IKE Policy screen is displayed (see
Figure 5-26 on page 5-28).