Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
5-10 Virtual Private Networking Using IPsec
v1.0, January 2010
Fill in the other options according to the instructions below.
• Under Connection Security, verify that the Secure radio button is selected.
•From the ID Type pull-down menu, choose IP Subnet.
• Enter the LAN IP Subnet Address and Subnet Mask of the VPN firewall LAN; in this
example, we are using 192.168.2.0.
• Check the Use checkbox and choose Secure Gateway Tunnel from the pull-down menu.
•From the first ID Type pull-down menus, choose Domain Name. Enter the FQDN
address which the VPN firewall VPN Wizard provided; in this example, we are using
gw1_local.com.
• From the second ID Type pull-down menu, choose Gateway IP Address and enter the
WAN IP Gateway address of the VPN firewall; in this example, we are using
21.208.216.81.
3. In the left frame, click My Identity. Fill in the options according to the instructions below.
•From the Select Certificate pull-down menu, choose None.
• Click Pre-Shared Key to enter the key you provided in the VPN Wizard; in this example,
we are using “r3m0+eClient”.
• From the ID Type pull-down menu, choose Domain Name.
• Leave Virtual Adapter disabled.
•In Network Adapter select the adapter you will use; the IP address of the selected adapter
is displayed.
Figure 5-12