Quick Reference Guide

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Virtual Private Networking Using IPsec 5-7
v1.0, January 2010
Follow these steps to configure the a VPN client tunnel:
• Configure the client policies on the gateway.
• Configure the VPN client to connect to the gateway.
Use the VPN Wizard Configure the Gateway for a Client Tunnel
1. Select VPN > IPsec VPN from the menu.
2. Click the VPN Wizard tab to display the VPN Wizard screen.
3. Select VPN Client as your VPN tunnel connection.
4. Create a Connection Name such as “Client to GW1”.
This descriptive name is not supplied to the remote VPN client; it is only for your reference.
Figure 5-8